Image of Stepper Driver - Economy - HY-DIV268N-5A

Stepper Driver - Economy - HY-DIV268N-5A

$21.99
Purchase

Stepper Driver for DC stepper motor.
Rated to 48v at 5amps, Recommended 36v at 3.5amp.
This is an entry level driver aimed at those with a restricted budget. Will connect to almost any breakout board and suitable for most NEMA 17, 23, 24 and low end 32 stepper motors.

Toshiba TB6600 Chip set

Simple connection;
Inputs: DC+, DC-, Pulse+, Step+, Enable+ and Common-
Outputs: A+, A-, B+ and B-

Input voltage form 12v to 48v DC (Recommended 36v)
Output amperage can be set to: 0.2, 0.6, 1.2, 1.8, 2.5, 3.3 4.2 or 5.0 Amps
Stepper motor steps can be divided by 1(full step) 1/2, 1/4, 1/8 or 1/16 to set your cutting resolution.

Items are fully tested prior to dispatch

Full Instructions available at:
Wire to power supply: http://hobbycncaustralia.com.au/Instructions/iI71DIV268NToPower.htm
Wire to stepper motor: http://hobbycncaustralia.com.au/Instructions/iI72DIV268NToStepper.htm
Wire to breakout board: http://hobbycncaustralia.com.au/Instructions/iI73JK02ToDIV268N.htm